Checkout

Your Basket 0 items.

DIAJEKT Chimney Fan (0)

INJEKT Chimney Fan (0)

DIAJEKT Chimney Fan (0)

DIAJEKT Chimney Fan

The beautifully engineered Diajekt fans from Kutzner + Weber are the perfect way to improve draught in your chimney system. Unfavourable weather, poor chimney positioning or an incorrectly designed flue gas system can all attribute to poor draught. The Diajekt fan works to maintain a steady negative pressure within the system- improving combustion, lowering emissions and making your flue system safer and more efficient.

Flue Adaptor (Insertion Adaptor)
The Diajekt plug-on fan adaptor allows you to connect the fan to your flue system, safely, quickly and easily. Just insert the adaptor into your existing stainless steel flue system and attach your Diajekt fan - it really is that simple! Our fan adaptors come in a silver/grey to best suit your flue system and are available for pipes from 130mm to 350mm (internal diameter).

Please note that this is not a stock item and average lead time will be 3-5 working days from receipt of order.

Square Flue Adaptor (Square Screw Plate).
Your Diajekt fan can also be fitted directly onto a brick-built chimney cowl (chimney pot) using the square flue adaptor. Your fan can also be screwed on directly, however, this is dependant on circumstances and may not be possible in all cases. It is also the recommendation of the manufacturer (Kutzner + Weber) that a square screw plate be used: "The chimney fan can be screwed on directly but we recommend the use of a square screw plate or an insertion adaptor".

Service Switch (Maintenance Switch)
The service switch is used to allow you to disconnect the power to the fan to allow for safe cleaning, or to prevent the fan from turning on should a fault occur and the fan needs to be inspected.

Please note that the manufacturer states that your fan "has to be equipped with a maintenance switch in order to disconnect the power".

Controller (Speed Adjuster)
It is not always necessary for your fan to run continuously when your stove/fireplace is in use, as the design of Diajekt fans allow the flue gases to continue to be freely evacuated when the fan is not in use. Once your flue gas system has reached its operation temperature your fan can be switched off, or be adjusted according to the individual requirements of your system, using the manual speed adjuster.

Timer & On-wall Housing
A timer can be fitted close to your stove or fireplace allowing you to set predetermined operating times ranging from 1 second to 10 hours. For example, you can set your timer to automatically shut down your Diajekt fan after 15 minutes during heating up.